| |
- Nersessian, N., Or, S.W., Carman, G.P., Choe, W., and Radousky, H., “Hollow and Solid Spherical Magnetostrictive Particulate Composites,” Journal of Applied Physics, V 96, num 5, pp. 3362-3365.
- Stewart, A., Carman G.P., ,Richards L., “Health Monitoring Technique for Composite Materials Utilizing Embedded Thermal Fiber Optic Sensors,” Journal of Composite Materials, accepted May 2004.
- Nersessian, N., Or, S.W., and Carman, G.P., “Magnetoelectric Laminates of Terfenol-D Composite & Lead Zirconate Titanate Ceramic Laminates,” IEEE Transactions of Magnetics, V 40, no 4, July 2004. pp 2646-2648.
- Nersessian, N, Or. D., Carman G.P., McCall, S., Choe, W. Radowsky, H.B., McElfresh, M.W., Percharsky, V.K., and Percharsky, A.O., “GdSiGe Composites for Magnetostrictive Actuator Applications,” Applied Physics Letters, V 84, no. 23, pp 4801-4803, 2004.
- E. Gans, C. Henry, and G. P. Carman, “Reduction in Required Magnetic Field to Induce Twin-boundary Motion in Ferromagnetic Shape Memory Alloys,” J. Applied Physics, V 95, no.11, pp. 6965-6967.
- D. Shin, K.P. Mochanchandra, G. P. Carman, “Development of Hydraulic Linear Actuator Using Thin Film SMA, “ Sensors and Actuators A, III(2-3), 166-171, 2004.
- D Shin, K. P. Mohanchandra and Gregory P. Carman ,”High Frequency Actuation of Thin Film NiTi,” Sensors and Actuators A: Physical, V 111 (2-3): 166-171 MAR 15 2004.
- Or, S. N. Neressian, and G. P. Carman, “Dynamic Magnetomechanical Behavior of Terfenol-D/Epoxy 1-3 Particulate Composites,” IEEE Transaction on Magnetics, 40, no.1, pp.1-7, 2004.
- S. Liberatore and G. P. Carman, “Power Spectral Density Analysis for Damage Identification and Location,” Journal of Sound and Vibration, In Press, Corrected Proof, October 2003.
- A. Stewart, G. Carman, L. Richards, “Nondestructive Evaluation Technique Utilizing Embedded Thermal Fiber Optic Sensors,” Journal of Composite Materials, V. 37, no. 24, pp. 2197-2207.
- A. N. Nersessian, S.W. Or, and G.P. Carman, “Magneto-Thermo-Mechanical Characterization of 1-3 Type Polymer-Bonded Terfenol-D Composites,” Journal of Magnetism and Magnetic Materials, Volume 263, Issues 1-2, July 2003, Pages 101-112.
- S.W. Or, N. Neressian, and G. P. Carman, “Dynamic Magnetomechanical Behavior of Terfenol-D/Epoxy 1-# Particulate Composites,” IEEE Transaction on Magnetics, 40, no.1, pp.1-7, 2004.
- S.W. Or, N. Nersessian, and G. P. Carman, Effect of Combined Magnetic Bias and Drive Fields on Dynamic Mangetomechanical Properties of Terfenol-D/Epoxy 1-3 Composites,” Journal of Magnetism and Magnetic Materials, Volume 262, Issue 2, June 2003, Pages L181-L185
- S.W. Or, N Nersessian, G.P. McKnight, and G.P. Carman,”Dynamic Magnetomechanical Properties of [112] Oriented Terfenol-D/Epoxy 1-3 Magnetostrictive Particulate Composites,” Journal of Applied Physics, V 93, Number 10, 2003, pp. 8510-8512.
- D.G.Lee, M. Mitrovic, G.P. Carman, and W. L. Richards, " Characterization
of Fiber Optic Sensors for Structural Health Monitoring," Journal
of Composite Materials, V 36, number 11, pp. 1349-1367.
- Ho, K, Mohanchandra, KP, Carman, G.P.,”Examination of the Sputtering
Profile of NiTi Under Target Heating Conditions,” Thin Solid Films,
V 413, Issues 1-2, June 2002, pp. 1-7.
- Chaplya, P. and Carman, G.P., “Compression of Piezoelectric
Ceramic at Constant Electric Field: Energy Absorption through non-180
Domain Wall Motion,” Journal of Applied Physics, V. 92, no.3,
to appear Aug 2002.
- Mcknight, G. and Carman G.P., “Oriented Terfenol-D Composites,”
Material Transactions, Vol.43 No.5 (2002) pp.1008-1014
- Fotinich, Y. & Carman G.P., Modeling Polycrystalline Behavior
of Piezoceramics” Journal of Ferroelectrics, V. 274, 2002, pp.
1-19.
- Salloux, K., Lim, J., Dunn, B., Chaplya, P., and Carman, G.P., “Rechargeable
Lithium Batteries for Powering Piezoelectric Devices,” Journal
of Intelligent Material Systems and Structures, Vol. 11, No. 12 Dec
2000, pp. 930-936.
- Gill, J. and Carman G.P., “Three Dimensional Thin Film Shape
Memory Microactuator with Inherent Two-Way Actuation,” Journal
for Microelectromechanical Systems, Feb 2002, V11 #1, pp. 68-78.
- Chaplya, Pavel and Carman, G.P., "Dielectric and Piezoelectric
Response of Lead Zirconate Titanate at High Electric and Mechanical
Loads in Terms of Non-180 Domain Wall Motion", Journal of Applied
Physics, November 2001, V 90 Issue 10, pp. 5278-5286.
- Duenas, T.A., and Carman, G.P., "Particle Distribution Study
for Low-Volume Fraction Magnetostrictive Composites", Journal of
Applied Physics, Sept. 1, 2001, V. 90, Issue 5, pp. 2433-2439.
- Gill, J.J., Chang, D., Momoda, L., and Carman, G.P., "Manufacturing
Issues of Thin Film NiTi Microwrapper", Sensors and Actuators,
Physical, 93(2), (2001), pp. 148-156.
- Park, J., Keller, S., Carman, G.P., and Hahn, H.T., "Development
of a Compact Displacement Accumulation Actuator
- Device for Both Large Force and Large Displacement", Sensors
and Actuators, A90, 2001, pp. 191-202.
- Lavine , A.S. and Carman G.P., “Thermomechanical Modeling of
Thin Film Shape Memory Alloy Devices,” Thermal Science and Engineering,
V. 8 no. 4, pp. 13-25
- Friedmann, P. P. , Carman, G.. and Millott, T. A, "Magnetostrictively
Actuated Control Flaps for Vibration Reduction in Helicopter Rotors-
Design Considerations for Implementation,” Mathematical and Computer
Modelling, Mathmatical and Computer Modeling, V 33, 2001, pp. 1203-1217.
- Chu, L., Chen, Q., and Carman G.P., “Strength Prediction for
Interlocking Microridges of the Mesoscale Actuator Device by Finite
Element Analysis,” Journal for Microeletromechanical Systems,
V. 10, No. 2, 2001, pp. 310-315.
- Park, J., Carman G.P., and Hahn H. T., “Design and Testing of
a Mesoscale Actuator Device,” Journal Intelligent Material Systems
and Structures, V 11, Sept. 2000, pp. 671-680.
- Chen, Q., Kim, C.J., Carman, G.P., “Investigating the Influence
of Fabrication Process and Crystal Orientation on Shear Strength of
Silicon Microcomponents,” Journal of Material Science, March 2000,
V. 35 no. 21 pp. 5465-5474.
- Ho, K. and Carman G.P., “Sputter Deposition of NiTi Thin Film
SMA Using a Heated Target,” Journal of Thin Solid Films, V 370,
pp. 18-29.
- Fotinich Y. and Carman G.P. , “ Nonlinear Modeling of Polarization
Switching in a Piezoceramic,” Journal of Applied Physics, V. 88
no. 11, pp. 6715-6725.
- Keefe, A. and Carman G.P., “Thermo-Mechanical Characterization
of Shape Memory Alloy Torque Tube Actuators,” Smart Materials
and Structures, V. 9 (2000) pp. 665-672.
- Duenas T. and Carman G.P., “Large Magnetostrictive Response
of Terfenol-D Resin Composites,” Journal of Applied Physics, Dec.
1999, Volume 87, Issue 9, pp. 4696-4701.
- Mitrovic, M., Carman G.P., and Straub, F. “Electro-Mechanical
Characterization of Piezoelectric Stack Actuators,” International
Journal of Solids and Structures, 38(224-25), 2001, pp. 4357-4374..
- Mitrovic M, Hahn H.T., Carman, G.P., and Shypryhevich P., “Effect
of Loading Parameters on Fatigue Behavior of Impact Damaged Composites,”
Composite Science and Technology, V. 59, 1999, pp. 2059-2078.
- Chen Q., Kim C.J., and Carman G.P., “Mesoscale Actuator Device:
Micro Interlocking Mechanism to Transfer Macro Load,” Sensors
and Actuators, vol. 73 (1999), pp30-36.
- Chen, Q.., Yao D., Kim, CJ, and Carman, G.P.,” Development of
Mesoscale Actuator Device with Micro Interlocking Mechanisms,”
Journal of Intelligent Materials Systems and Structures, Vol 9, No.
6, June 1998, pp. 449-458.
- Park, S.B., Park S.S., Carman, G.P., and Hahn, H.T., “Measuring
Strain Distribution During Mesoscopic Domain Reorientation in a Ferroelectric
Material,” Transactions of the ASME. Journal of Engineering Materials
and Technology, Jan. 1998, vol.120, (no.1):1-6.
- Wang, D., Fotinich, E., and Carman, G.P., “Influence of temperature
on the Electro-mechanical and Fatigue Behavior of Piezoelectric Ceramics,”
Journal of Applied Physics, May 1998, V 83, (no.10) pp. 5342-5350.
- Park, S.B. and Carman, G.P., “Minimizing Stress Levels in Piezoelectric
Media Containing Elliptical Voids,” Transactions of the ASME.
Journal of Applied Mechanics, September 1997, vol.64, (no.3):466-70.
- Park, S.B. and Carman G.P., “Tailoring the Properties for Piezoelectric
Ceramics: Analytical,” Journal of Solids and Structures, Sept.
1997, V. 34 (no. 26), pp. 3385-3399.
- Eskandari, S., and, Carman, G.P., "Evaluating the Influence of
Fiber Coatings on Compression Strength of a Unidirectional Polymer Composite"
Journal of Composite Materials, V. 30 No. 18, 1996, pp. 1958-1976.
- Carman, G.P., and Mitrovic, M., "Nonlinear Constitutive Relations
for Magnetostrictive Materials with Application to 1-D Problems,"
Journal of Intelligent Material Systems and Structures, V. 6, No. 5,
1995, pp. 673-683.
- Carman, G.P., Chung, K., and, Wang, D., "Micro-Mechanical Model
of a Composite Containing a Conservative Nonlinear Electro-Magneto-Thermo-Mechanical
Material," Journal of Intelligent Material Systems and Structures,
V. 6, No. 5, 1995, pp. 691-699.
- Mitrovic, M., and Carman, G.P., "Effect of Fatigue Damage in
Woven Composites on Thermo-Mechanical Properties and Residual Compressive
Strength," Journal of Composites, V. 30 No. 2, 1996, pp. 164-189.
- Stam, M., and Carman, G.P., "Electro-Thermo-Elastic Behavior
of Piezoelectric Coupled Cylinders,” AIAA Journal, V. 34 No. 8,
pp. 1612-1619.
- Carman, G.P., and Sendeckyi, G.P., "Review of the Mechanics
of Embedded Optical Sensor," Journal of Composite Technology and
Research, 1995, vol. 17 No. 3, pp. 183-193.
- Lai, L., Carman, G.P., Chiou, S., Kukucrek, P., and Echternoch, D.,
"Process Monitoring of Carbon/Phenolic Composites Using Smart Sensors,"
Smart Materials and Structures, Vol. 4, 1995, pp. 118-125.
- Case, S.W., Carman, G.P., Lesko, J.J., and Fajardo, A.B., "Fiber
Fracture in Unidirectional Composites," Journal of Composite Materials,
Vol. 29 No. 2, 1995, pp. 208-229.
- Case, S.W., and Carman, G.P., "Optimization of Fiber Coatings
for Transverse Performance: An Analytical and Experimental Study,"
Journal of Composite Materials, Vol. 28 No. 15, 1994, pp. 1452-1467.
- Case, S.W., and Carman, G.P., "Compression Strength of Composites
Containing Embedded Sensors or Actuators," Journal of Intelligent
Material Systems and Structures, Vol. 5 No. 1, pp. 4-12, January 1994.
- Case, S.W., Lesko, J.J., Fogg, B.R, and Carman, G.P.., "Embedded
Extrinsic Fabry-Perot Fiber Optic Strain Rosette Sensor," Journal
of Intelligent Material Systems & Structures, Vol. 5 No. 3, pp.
412-418, March 1994.
- Carman, G., and Reifsnider, K., "Analytical Optimization of Coating
Properties for Actuators and Sensors," Journal of Intelligent Material
Systems and Structures, Vol. 4, No. 1, pp. 1-9, Jan. 1993.
- Carman, G.P., "Designing Improved Composite Materials Through
the Use of Fibre Coatings," Materials & Design, Vol. 14 No.
3, pp. 183-188, 1993.
- Lesko, J.J, Carman G.P., Dillard, D.A., and Reifsnider, K.L., “Indentation
Testing of Composite Materials as a Tool for Measuring Interfacial Quality,”
American Society for Testing and Materials ASTM, STP 1156, 4th Vol.
Pp. 1-29, 1993
- Carman, G.P., Lesko, J.J., and Reifsnider, K.L., “Micromechanical
Analysis of Fiber Fracture,” American Society for Testing and
Materials ASTM, STP 1156, 4th Vol. pp. 430-452, 1993
- Carman, G.P., Lesko, J.J., Reifsnider, K.L., and Dillard, D.A., "Micromechanical
Model of Composite Materials Subjected to Ball Indentation," Journal
of Composite Materials, Issue No. 9, 1993, pp. 1-23.
- Carman, G.P., Averill, R.C., Reifsnider, K.L., and Reddy, J.N., "Optimization
of Fiber Coatings to Minimize Stress Concentrations in Composite Materials,"
Journal of Composites, Vol. 27, No. 6, pp. 1-24, 1993.
- Carman, G.P., Lesko, J.J., Razavan, A., and Reifsnider, “Model
Composites: A novel Approach for the Evaluation of Micromechanical Bahavior,”
American Society for Testing and Materials ASTM, STP 1156, 4th Vol.
Pp. 381-400, 1993
- Lesko, J.J., Carman, G.P., Fogg, B.R., Miller III, W.V., Vengsarkar,
A.M., Reifsnider, K.L., and Claus, R.O., "Embedded Fabry-Perot
Fiber Optic Strain Sensors in the Macromodel Composites," Optical
Engineering SPIE, Vol. 31, No. 1, pp. 13-22, January, 1992.
- Carman, G.P., and Reifsnider, K.L., "Micromechanics of Short-Fiber
Composites," Composite Science and Technology, Vol. 43, pp. 137-146,
1992.
- Case, S.W., Carman, G.P., and Reifsnider, K.L., "Optimization
of Transverse Performance Through Application of Appropriate Interphase
Coatings," Advanced Composites Letters, Vol. 1, No. 4(4), pp. 1-4,
1992.
- Carman, G.P., Cramer, M.S. "Nonlinearity Parameters for Pulse
Propagation in Isotropic Elastomers," Journal of the Acoustical
Society of America, Vol. 91, (1), pp. 39-51, January 1992.
- Gao, Z., Reifsnider, K.L., and Carman, G.P., "Tensile Strength
of Uni-Directional Composites with Statistical Fiber Flaw Distributions,"
Journal of Composite Materials, Vol. 26, No. 11, pp. 1678-1705, Aug.
1991.
- Carman, G.P., Berry, J.T. "Estimating the Modulus of Elasticity
of Cast Aluminum Matrix Composites," Trans. of the Am. Foundrymens
Soc., Vol. 97, pp. 277-280, 1989.
|
| |
- Gans, E. and Carman, G.P., "Fabrication & Magnetic Testing of Fibular (1-3) NiMnGa Composites " ICAST 14th Int Conference, 83-90 (2003)
- Massad, J., Smith, R., and Carman, G.P., "A Free Energy Model for Thin-Film Shape Memory Alloys" SPIE SMART Structures & Materials 2003, V 5049:13 - 23
- Nersessian, N., Or, S.W., Carman, G.P., Choe, W., Radowsky, H., Perchavsky, V., and Perchavsky, A., "Temperature & Magnetic Field Induced Phase Transformation in Bulk & Composite GdSiGe" SPIE SMART Structures & Materials 2003, V 5053:25 - 30 (2004)
- Mohanchandra, K. and Carman, G.P, "Grown Crystalline NiTi Shape Memory Alloy Thin Films" SPIE SMART Structures & Material 2003, 5053:212 - 218
- Momoda, L., Croft, D., Carman, G.P., and Shin, D., "Compact Hybrid Actuator Device (CthAD) for Ultracompact, Navigation, Guidance and Control" SPIE SMART Structures & Material 2003, 5053:85 - 97
- Pulliam, W., Lee, D., Carman, G., and McKnight, G., "Thin-layer Magnetostrictive Composite thin Films for Turbomachinery" SPIE SMART Structures & Material 2003, 5054:360 - 37
- Lee, D.G., Chen, Q., Shin, D., Carman, G.P., "Microvalve for SMA-based CHAD" SMART Structures & Materials 2003, 5055:300 - 306
- Stewart, A., Carman, G.P., Richards, L., "Thermography Technique for Graphite/Epoxy Composite Structures Utilizing Embedded Thermal Fiber Optic Sensors" SMART Structures & Materials 2003, 5056:93 - 98
- Woolman, J., Mohanchandra, K.P. and Carman, G.P., "Composition & Annealing Effects on the Mechanical Properties of Superelastic Thin Film Nickel Titanium" SMART Structures & Materials 2003, 5053:230 - 238
- Nersessian, N., Or, S.W., & Carman, G.P., "Magnetoelectric Effect on Magnetostrictive/Polymer and Piezelelectric Composites" Proceedings of IMECE 2003, ASME, CD-ROM.
- Chaplya, P., Mcknight G., and Carman G.P., “Mechanical Deformation of Field Coupled Materials,” ASME IMECE 2002-39009, Adaptive Structures and Material Systems Symposium of Aerospace Division, page 1-7.
- Chen, Q. Li, B., Lee, D., Woolman, J., and Carman, G.P., ” Development of Robust Microvalves for Large Flow Rate Hydraulic Actuators, MEMS2003: 16th IEEE Int'l Conf on MicroElectroMechanical Systems. Kyoto Japan, January 19-23”
- Or, S.W., Nersessian, N., and Carman, G.P.,” Dynamic Characterization
of 1-3 Type Terfenol-D/Epoxy Magnetrostrictive Composite,” 10th
AIAA/ASME/AHS Forum, April 2002, paper no. AIAA-2002-1552, pp. 1-10.
- Richards, L., Piazza, A., Hudson, L., Parker, A., Carman G., Mitrovic,
M., Lee, D., and Stewart, A. “Fiber Optic Sensor Development for
the Structural Health Management of Reusable Launch Vehicles,”
Structural Health Monitoring: The Demands and Challenges, Sept, 2001,
pp. 133-143.
- Pulliam, W., McKnight, G., Carman, G., “Recent Advances in Magnetostrictive
Particulate Composite Technology”, SPIE Smart Structures and Materials,
San Diego, CA, March, 2002
- Mcknight, G. and Carman G. P. “Large Magnetostriction in Oriented
Particle Terfenol-D Composites,” Proceedings of 2001 ASME IMECE,
Adaptive Structures and Material Systems Symposium, Nov 11-16 2001,
pp. 1-6 (CD-ROM).
- Shin D. and Carman G. P. “Operating Frequency of Thin Film NiTi
in a Fluid Medium,” Proceedings of 2001 ASME IMECE, MEMS Symposium,
Nov 11-16 2001, pp. 1-7 (CD-ROM).
- Mcknight, G, Pulliam, W., Shin, D., and Carman G.P., “Magnetstrictive
Particulate Composite Damping,” American Society of Composites
16th annual meeting, Sept, 2001, pp. 148-160.
- Liberatore, S., and Carman, G.P., "Damage Detection Using Piezoelectrics
Modal Analysis and PSD Technique", Adaptive Structures and Material
Systems, Orlando, FL, Nov. 2000, pp. 359-366.
- Nersessian, N., and Carman, G.P., "Magneto-Mechanical Characterization
of Magnetostrictive Composites", Adaptive Structures and Material
Systems, v. 60, Orlando, FL, Nov. 2000, pp. 139-146.
- Chaplya, P.M. and Carman, G.P., "The Effect of Mechanical Prestress
on Dielectric and Piezoelectric Response of PZT-5H at High Electric
Fields", Adaptive Structures and Material Systems, Orlando, FL,
Nov. 2000, pp. 327-334.
- Lee, D., Mitrovic, M., Stewart, A., Richards, L. and Carman, G.P.,
"Experimental Evaluation of Embedded EFPI Optical Fiber Sensors
for Structural Health Monitoring", Proc. SPIE, Smart Structures,
Active Materials and Mechanics Session, Newport Beach, CA, March 2001,
V. 4327, pp. 10-20.
- McKnight, G.P., and Carman, G.P., "Large Magnetostriction on
Terfenol-D Particulate Composites with Preferred [112] Orientation",
Proc. SPIE, Smart Structures, Active Materials and Mechanics Session,
Newport Beach, CA, March 2001, V 4333, pp. 178-183.
- Nersessian, N, and Carman, G.P., "Magneto-Thermo-Mechanical Characterization
of Magnetostrictive Composites", Proc. SPIE, Active Materials Behavior
and Mechanics Session, Newport Beach, CA, March 2001, V4333, pp. 166-177.
- Liberatore, S., Carman, G.P., and Speyer, J., "Power Spectral
Density (PSD) Technique in Damage Detection", Proc. SPIE, Smart
Structures Integrated Systems, Newport Beach, CA, March 2001, V4327,
pp. 86-91.
- Mohanchandra, K., Ho, K., and Carman, G.P., "Influence of Target
Temperature on Crystallization and Properties of NiTi Thin Film Shape
Memory Alloy", Proc. SPIE, Active Materials and Mechanics, V4333,
2001, pp. 420-424.
- Chaplya, P., and Carman, G.P., "Investigation of Energy Absorption
Capabilities of Piezoelectric Ceramics", Proc. SPIE, Active Materials
and Mechanics, V4333, 2001, pp. 214-220.
- Duenas, T., and Carman, G.P., "Particle Distribution Study for
Low-Volume Fraction Composites", International Symposium on Smart
Structures and Microsystems, Hong Kong, CD-ROM.
- Mitrovic, M., Carman, G.P., and Straub, F., “Durability Properties
of Piezoelectric Stack Actuators Under Combined Electro-Mechanical Loading,”
Smart Structures and Materials 2000, Active Material Behavior and Mechanics,
SPI V. 3992, pp. 217-232.
- Fotinich, Y. and Carman, G.P., “Nonlinear Behavior of Polycrstalline
Piezoceramics,” Smart Structures and Materials 2000, Active Material
Behavior and Mechanics, SPIE V. 3992, pp. 319-330.
- McKnight, G. and Carman, G.P., “Energy Absorption in Axial and
Shear Loading of Particulate Magnetostrictive Composites,” Smart
Structures and Materials 2000, Active Material Behavior and Mechanics,
SPI V. 3992, pp. 572-579.
- Chen, Q., and Carman, G.P., “Microscale Tribology (Friction)
Measurement and Influence of Crystal Orientation and Fabrication Process,”
(50 papers accepted out of 450 submitted), MEMS 2000, Japan, in print.
- Ho, K., Gill, J., and Carman G.P., “Sputter Deposited NiTi Thin
Film SMA for Active Flow Control,” 10th International Conference
on Adaptive Structures 1999, pp. 197-208.
- Mcknight, G. and Carman G.P., ”Energy Absorption and Damping
in Magnetostrictive Composites,” Materials Research Symposium,
Smart Materials, Boston Dec 1999, in print.
- Gill, J. and Carman G.P., “The Fabrication of Thin Film NiTi
Shape Memory Alloy Micro Actuator for MEMS Application,” ASME
Adaptive Structures and Material Systems Symposium, AD-Vol 59, Nashville
Tenn Nov. 1999 pp. 125-133.
- Chaplya, P. and Carman G.P., “Crack Initiation Between Dissimilar
Oriented Domains As A Possible Accelerated Fatigue Test,” ASME
Adaptive Structures and Material Systems Symposium, AD-Vol 59, Nashville
Tenn Nov. 1999 pp. 105-111.
- Mitrovic, M., Carman, G.P., Straub, F., “Electro-Mechanical
Characterization of Piezoelectric Stack Actuators,” SPIE Smart
Structures Conference 1999, V. 3668, pp. 586-601.
- Goldie, Gerver, M., Oleksy, J., Carman, G., Duenas, T.,”Composite
Terfenol-D Sonar Transducers,” SPIE Smart Structures Conference,
1999, V 3675, pp. 223-235.
- Weisensel, N., Zrostlik, R., and Carman, G.,” Advanced Magnetostrictive
Finite Element Method (FEM) Modeling Development,” SPIE Smart
Structures Conference, 1999, V 3667, pp. 100-110.
- Keefe, A., and Carman, G.,”Thermo-Mechanical Characterization
of Shape Memory Alloy Torque Tubes,” SPIE Smart Structures Conference
1999, V 3675 pp. 295-303.
- Favelukis, J, Lavine, A., and Carman, G.P., “An Experimentally
Validated Thermal Model of Thin Film NiTi,” SPIE Smart Structures
Conference, 1999, V 3668, pp. 617-629.
- Ho, K, Carman, G.P., and Jardine. P.,”Sputter Deposition of
NiTi Thin Film Exhibiting the SME at Room Temperature,” SPIE Smart
Structures Conference, 1999, V 3675, pp. 252-267.
- Hsu L., Duenas T., Mitrovic M., and Carman, G.P., “ Modeling
Approaches for Magnetostrictive Materials,” ICAST 1998, Adaptive
Structures Technologies, Oct 1998, pp. 527-543.
- Chen, Q., Yao, D., Kim, C.J., and Carman G.P.,” Influence of
Fabrication and Crystal Orientation on the Strength of Silicon Microridges”
ASME WAM 1998, Micro-Electro-Mechanical Systems (MEMS) 1998, pp. 413-421.
- Duenas T. and Carman G.P., “Experimental Results for Magnetostrictive
Composites,” ASME 1998, Adaptive Structures and Material Systems,
pp.63-73
- Keefe, A, Carman, G.P., and Jardine, A.P., ”Torsional Behavior
of Shape Memory Alloys,” Proceedings of the SPIE - The International
Society for Optical Engineering, Smart Materials Technology, V3324,
pp. 58-68.
- Chapyla, P & Carman G.P.,”Relation of the Cracking Phenomena
in Piezoelectrics to Domain Wall Motion,” Proceedings of the SPIE
- The International Society for Optical Engineering, Smart Materials
Technology, V3324, pp. 154-161.
- Chen, Q. et al., “Frequency Response of an Inchworm Motor Fabricated
with Micromachined Interlocking Surface Mesoscale Actuator Device (MAD).
Smart Structures and Integrated Systems, San Diego, Proceedings of the
SPIE - The International Society for Optical Engineering, 1998, vol.3329,
pt.1-2:768-79.
- Fotinich, Y. & Carman G.P., “Modeling of Polarization Switching
in Piezoceramics,” Proceedings of the SPIE - The International
Society for Optical Engineering, Mathematics and Control in Smart Structure,
1998, vol.3323:96-10
- Wang, D, & Carman G.P.,”Combined Electrical and Mechanical
Fatigue of Piezoelectric Ceramics Undergoing Polarization Reversals
for Large Displacement,” Proceedings of the SPIE - The International
Society for Optical Engineering, Smart Structures and Integrated System,
vol.3329, pt.1-2:210-21.
- Chen, Q., Yao,D., Kim, C.J., & Carman, G.P.,”Mesoscale Actuator
Device with Micro Interlocking Mechanism,” Eleventh IEEE International
Workshop on MICRO ELECTRO MECHANICAL SYSTEMS", January 25-29,1998,
Heidelberg, Germany.
- Wang, D., Alexander, H., Chen, Q., Carman, G.P., Kim, C.J., and Ho
C., Piezoelectrically Driven Meso-Scale Actuator Device for Aerodynamic
Control, AIAA Adaptive Structure Forum, Fla, April 1997, pp. 1738-1747.
- Ho, K, Carman, G.P., Jardine, P., Kim, C.J., “Modeling and Measuring
the Response Times of Thin film TiNi,” Smart Structures and Materials
1997 Smart Materials Technology, San Diego 1997, pp. 10-23.
- Park, S.S., Carman G.P., Park, S.B., “Moire Interferometer
Applied to Piezoceramics Containing a Simulated Void,” Smart Structures
and Materials 1997 Smart Materials Technology, San Diego 1997, pp. 120-129.
- Fotinich, Y. & Carman G.P., “Modeling the Nonlinear Behavior
of Piezoceramics With FEM,” Smart Structures and Materials 1997,
SPIE San Diego.
- Friedmann, P.P., Carman, G.P., and Millot, T.A., “Magnetostrictive
Actuated Control Flaps for Vibration Reduction in Helicopter Rotors
- Design Considerations for Implementations,” 36th Israel Annual
Conference on Aerospace Sciences, Feb. 21-22, 1996.
- Park, S.B., and Carman G.P., “Linear and Nonlinear Behavior
of Piezoelectric Materials,” SPIE Smart Structures Meeting, Mathmatics
and Control in Smart Structures, San Diego, Feb. 1996, pp. 366-378.
- Park, S.B., Park S.S., Carman G.P., and Hahn, H.T., “Polarization
Switching for Ferroelectric Materials,” ASME WAM 1996, AD-Vol.
52, Atlanta Ga., pp. 603-613.
- Duenas, T., Hsu L., and Carman G.P., “Magnetostrictive Composite
Material Systems Analytical/Experimental,” Materials Research
Symposium, Materials for Smart Systems -II, V 459, Invited paper, pp.
527-545.
- Stam, M., Wang, D., and Carman, G.P., "Analytically Evaluating
the Response of Cylindrical Piezoelectric Material Systems Subject to
Thermal Loads," Smart Structures and Integrated Systems, V. 2443,
pp. 434-348, 1995.
- Wang, D., and Carman, G.P., "Evaluating the Behavior of Piezoelectric
Ceramics Subjected to Thermal Loads," Adaptive Materials Systems
Symposium, ASME AMD-V206, pp. 47-57, 1995.
- Mitrovic, M., and Carman, G.P., "Influence of Damage on the Vibration
Response of Composite Laminates," Damage and Durability Symposium,
ASME-WAM, 1995.
- Mitrovic, M., Roberts, M., and Carman, G.P., "Magnetostrictive
Composite Material Systems: Analytical/Experiment," American Society
of Composites, 1995.
- Roberts, M.M., Mitrovic, M., and Carman, G.P., "Nonlinear Behavior
of Coupled Magnetostrictive Material Systems Analytical/Experimental,"
Smart Materials, V. 2441, pp. 341-355, 1995.
- Mitrovic, M., and Carman, G.P., "The Influence of Tensile Fatigue
Damage of Residual Compressive Strength of Woven Composites," American
Society of Composites, 1995.
- Carman, G.P., and, Mitrovic, M., "Nonlinear Behavior of Magnetostrictive
Materials," Engineering Mechanics, Proceedings of the 10th Conference
of the ASCE, Boulder, CO, May 1995, pp. 714-718.
- Wang, D., and Carman, G.P., "Development of an Innovative Meso-scale
Actuator Device," Adaptive Material Systems and Symposium, ASME
Winter Annual Meeting, San Francisco, CA, 1995.
- Park, S.B., Fotinich, Y., and Carman, G.P., “Minimizing Stress
Fields Near Defects in Piezoceramics,” 6th Int. conf. On Adaptive
Structures, 1995, pp. 87-102
- Murphy, K.A., Schmid, C.A., Tran, T.A., Carman, G., Wang, A., and
Claus, R.O., "Delamination Detection in Composites using Optical
Fiber Techniques," Smart Sensing, Processing, and Instrumentation,
February 1994, pp. 227-232.
- Carman, G.P., and Mitrovic, M., "Health Monitoring Techniques
for Composite Materials Employing Thermal Parameters and Fiber Optic
Sensors," Smart Sensing, Processing and Instrumentation, February
1994, p. 244-258.
- Carman, G.P., and Reichik, B., "Modeling of Laminated Plates
Containing Elastic Nonlinear Actuators," Smart Structures and Intelligent
System, February 1994, pp. 142-153.
- Carman, G.P., Wong, D., and Bar-Cohen, Y., "Health Monitoring
Systems with Active Control Capabilities," Proc. 39th Int'l SAMPE
Symposium," Vol. 39, April 1994, pp. 3127-3142.
- Carman, G.P., and Mitrovic, M., "Nonlinear Constitutive Relations
for Magnetostrictive Materials," Proc. of the 2nd Int'l Conference
on Intelligent Materials, July 1994, pp. 265-278.
- Carman, G.P., and Eskandari, S., "Analytical/ Experimental Study
on Interphase Effects of Composite Compression Strength," Proc.
IUTAM Symposium, Aalborg, Denmark, August 23-25, 1994.
- Carman, G.P., Eskandari, S., and Case, S., "Analytical Investigation
of Fiber Coating Effects on Shear and Compression Strength," Proc.
ASME WAM 1994, Symposium on Durability and Damage Tolerance, pp. 95-111.
- Carman, G.P., "Analytically Modeling the Effect of Electromechanical
Coatings on Anti-Plane Shear and Compression," Proc. ASME WAM 1994,
Symposium on Adaptive Structures and Material Systems, pp. 167-175.
- Schmidt, C.A., Miller, M.S., Carman, G.P., Murphy, K.A., and Claus,
R.O., "Delamination Detection Scheme Incorporating Optical Fiber
Sensors," Proc. Fiber Optics Review Conference, Va. Tech, 1993,
pp. 1-9.
- Carman, G.P., Plante, A., and Claus, R.O., "Fiber Sensor-Based
Thermal Mapping for Measuring Material Damage," Proc. Fiber Optics
Review Conference, Va. Tech, 1993.
- Carman, G.P., Lesko, J.J., Razvan, A., and Reifsnider, K.L., "Model
Composites: A Novel Approach for the Evaluation of Micromechanical Behavior,"
Composite Materials: Fatigue and Fracture (4th Symposium ASTM), ASTM-STP
1156, pp. 381-400, 1993.
- Lesko, J.J., Carman, G.P., Dillard, D.A., and Reifsnider, K.L., "Indentation
Testing of Composite Materials as a Tool for Measuring Interfacial Quality,"
Composite Materials: Fatigue and Fracture (4th Symposium ASTM), ASTM-STP
1156, pp. 1-29, 1993.
- Carman, G.P., Lesko, J.J., and Reifsnider, K.L., "Micromechanical
Analysis of Fiber Fracture," Composite Materials: Fatigue and Fracture
(4th Symposium ASTM), ASTM-STP 1156, pp. 430-452, 1993.
- Paul, C.A., Sendeckyj, G.P., and Carman, G.P., "Detection of
the Onset of Damage Using an Extrinsic Fabry-Perot Interferometric Strain
Sensor (EFPI-SS)," Proc. Smart Structures and Materials Conference,
Alb. NM, Feb. 1993, pp. 1-11.
- Carman, G.P., Paul, C., and Sendeckyj, G.P., "Transverse Strength
of Composites Containing Optical Fibers," Proc. Smart Structures
& Materials Conference, Alb. NM, Feb. 1993, pp. 1-10.
- Carman, G.P., Murphy, K., Schmidt, C.A., and Elmore, J., "Extrinsic
Fabry Perot Interferometric Sensor Survivability During Mechanical Fatigue
Cycling," Proc. SEM Spring Conference on Exp. Mech., Dearborn,
Mich., June 1993, pp. 1-9.
- Reifsnider, K.L., Carman, G., Xu, Y., and Subramanian, S., "Micromechanical
Representations of Failure Processes in Composite Material Systems,"
Proc. 2nd U.S. National Congress of Computational Mechanics, Washington,
D.C., Aug. 16-18, 1993, pp. 1-43.
- Carman, G.P., Jeng, S.M., and Yang, J.-M., "An Innovative Characteristic
Damage Parameter for Monitoring the Fatigue Damage in a Composite Material,"
Proc. ASME WAM, Nov. 1993, pp. 1-9.
- Carman, G.P., Chiou, S., Eckternach, D., Roundy, F., and Meaney, J.,
"Implementation of Fiber Optic Sensors in Polymeric Composites,"
Proc. WAM ASME, Dec. 1993, pp. 1-6.
- Burford, M.K., Miller, M.S., Grace, J.L., Carman, G.P., Murphy, K.A.,
and Claus, R.O., "Experimental Characterization of Sensor and Actuator
Embedded Intelligent Materials," Proc. of the 2nd Int'l Conference
on Intelligent Materials, pp. 235-247.
- Reifsnider, K.L., and Carman, G., "The Micromechanics of Damage
Evolution in Composite Material Systems," Proc. Winter Annual Meeting
of ASME, 1992, pp. 1-12.
- Lesko, J.J., Carman, G.P., Dillard, D.A., Reifsnider, K.L. "Fiber/Matrix
Interface Interrogation by Means of Meso-Indentation Testing,"
Proceedings of the 5th Annual Meeting of the Adhesion Society, February
1992.
- Carman, G.P., Lesko, J.L., Reifsnider, K.L., Vengsarkar, A., Miller,
B., Fogg, B., and Claus, R.O., "Micro-Damage Analysis with Embedded
Sensors in Macro-Composites," Proc. Active Materials & Adaptive
Structures Conf., Alexandria, VA, Feb. 1992, pp. 1-6.
- Carman, G.P., Reifsnider, K.L. "Analytical Minimization of the
Obtrusive Behavior Indictive of Embedded Sensors and Actuators,"
Recent Advances in Adaptive and Sensory Materials and Their Applications,
Virginia Polytechnicnic Institute & State Univ., April 1992.
- Carman, G.P., Lesko, J.J., Case, S.W., Reifsnider, K.L., May, R.,
Fogg, B., Claus, R.O., O'Keefe, C.V., Ranganathan, B.N., and Couch,
W., "Measuring Damage Accumulation in a Composite Cylinder with
Fabry-Perot Fiber Optic Strain Sensors (FP-FOSS)," Proceedings
of the Fiber Optic Sensor Based Smart Materials and Structures Workshop,
Technomic Publishing Co., April 1992, pp. 1-6.
- Carman, G.P., Case, S.W., Lesko, J.J., and Fogg, B.R., "Implementation
and Evaluation of an Embedded Extrinsic Fabry-Perot Fiber Optic Strain
Rosette Sensor," SPIE, Smart Structures Session, Boston, Sept.
1992, pp. 1-9.
- Miller, M.S., Case, S.W., Carman, G.P., Schmidt, C.A., May, R.G.,
and Claus, R.O., "Validation of Axial Strain Transfer from a Composite
Laminate to Embedded Optical Fiber Sensors," Proc. SPIE, Smart
Structures Session, Boston, Sept. 1992, pp. 1-11.
- Carman, G.P., and Case, S.W., "Minimizing Stress Concentrations
in Material Systems with Appropriate Fiber Coatings (Shear Strength)",
American Society of Composites, 7th Technical Conference on Composite
Materials, Penn State, Oct. 1992, pp. 1-10.
- Lesko, J.J., Carman, G.P., Reifsnider, K.L., Vengsarkar, A.M., Miller,
W.V., Fogg, B.R., Claus, R.O. "Application of Fabry-Perot Fiber
Optic Sensors in Composite Macro-Models," Proceedings of the Fiber
Optic Sensor Based Smart Materials & Structures Workshop, Technomic
Publishing Co., April 1991
- Carman, G.P., Lesko, J.J., Reifsnider, K.L. "A Micromechanical
Model of Penetration Strength in Composite Systems," USA-USSR Symposium
on Mechanics of Composite Materials, October 1991
- Averill, R., Carman, G.P. "Analytical Modeling of Micromechanical
Stress Variations in Continuous Fiber Reinforced Composites," IUTAM
Symposium; Local Mechanics Concepts for Composite Material Systems,
(invited paper), October 1991.
- Gao, Z., Carman, G.P., Reifsnider, K.L., Swain, R.E. "Micromechanics
of Property Evaluation in Composite Systems," CCMS Proceedings,
VPI & SU, September 23-26, 1990.
- Carman, G.P., Berry, J.T. "Modeling the Mechanical Behavior of
Current and Proposed Metal Matrix Composites," Winter Annual Meeting
of ASME, Advances in Mechanical Behavior and Properties Evaluation,
Vol. 7, pp. 45-69, 1988.
|
